Return Policy
Festool CSC SYS 50 Cordless Table Saw is a compact and highly portable machine that delivers a level of precision that could usually only be produced by high end stationary table saws. Able to be carried with just one hand, the entire machine fits inside a Systainer and the Systainer body is lifted of to access the machine.
The CSC SYS 50 is powered by two 18 volt batteries that provide a lots of power and torque that are comparable of a plug-in saw. Battery life is also excellent, with enough energy in a pair of 5.0 Ah batteries to cut 1,000 metres of 20 millimetre chipboard.
CSC SYS 50 Cordless Table Saw features the precision and repeatability of digital controls
The digital display on the front of the machine clearly states the blade's height and angle. The height can be adjusted in 0.1 millimetre increments, and angle in 0.1 degree increments. Four presets for common settings can be stored on the machine, and an additional 4 settings can be stored via the Festool Work app on your mobile device.
Versatile and high quality accessories enhance the usability of the CSC SYS 50 table saw
The high quality rip fence and mitre gauge for sliding table provide guidance for rips and crosscuts. The mitre gauge is adjustable up to 70 degrees in either direction.
The table saw is supplied with a low profile riving knife for non-through cuts, and a splitter with blade guard. All accessories store neatly in the lid of the Systainer hood. When not in use, and for transporting, the Systainer hood fits over the saw and two latches lock it in place.
Support for long pieces
The right side outfeed table pops up and provides support for the rip fence to make rip cuts up to 11 inches wide. The UG Underframe positions the saw at two convenient heights for work on the floor, or standing, and the flip up support provides additional support for long or wide workpieces.
Festool CSC SYS 50 Cordless Table Saw EBI-Basic 576821 specifications
- Requires 2x 18 volt batteries
- 4,500 to 6,800 RPM no load speed
- 20 millimetre arbor
- -10 to 47 degree bevel angle
- 0 to 48 millimetre (0 to 1-7/8 inch) cutting height at 0 degrees
- 0 to 34 millimetre (0 to 1-11/32 inch) cutting height at 45 degrees
- 21 to 32 millimetre (13/16 to 1-1/4 inch) cutting height at -10 degrees
- -70 to 70 degree mitre angle
- 280 millimetre (11 inch) ripping width
- 280 millimetre (11 inch) tabletop height
- 512 x 396 x 296 millimetres (20-5/32 x 15-19/32 x 11-21/32 inches
- 27 millimetre (1-1/16 inch) dust extraction port
- 20.2 kilograms (45 pounds) without batteries
Festool CSC SYS 50 Cordless Table Saw EBI-Basic 576821 scope of delivery
- CSC SYS 50
- Fine 42 tooth wood blade
- Rip fence
- Push stick
- Mitre gauge
- Dust collection bag
- Riving knife
- Blade guard and splitter
- Hex key
